So won't be using on plastic in the near future, cheers the advice.
The silicone is touching metal only, its where the metal co2 tube coming from the co2bottle joins the regulator that is metal or whatever metal co2 art make their dual Regulators with.
Checked again for leaks today and found a small leak pre- regulator. Slapped some silicone around the joint and problem solved. Will keep an eye on this for the next week or two.
Just goes to show that even though I had checked twice before for leaks, it's worth checking again.
Hope you can help, I currently have a dual stage regulator and ive noticed the working presure needle keeps fluctuating from 20bar to 40 bar. This is causing the bubble rate to go really fast to really slow. This is happening when the co2 is turned on and working. This is happening...
It would seem that the di unit is disconnected from the flush. How will this effect everything?
Currently get 45psi from the tap, I understand this is low and will need to get a booster pump. Any ideas on what kind of pump I will need for this system? Ive been quoted around £150 from the...
Going to make some ro today so will see if the problem still exists. Will also check that the membrane has not dislodged itself.
Update. Used the system todaynand got the same readings:'( . So i checked the tds before the di stage and after. The results are before di stage 64ppm and after di...
The system had been running for 1 hour
So can I add this water straight to the tank?
I have some gh booster I got from one of the sponsor on the site, should I add this. All very confusing being new to ro usage.
Hope some one can offer me a bit of advice.
So i purchased a new ro system http://www.osmotics.co.uk/products/6-Stage-300-Gallon-Per-Day-Reverse-Osmosis-System.html
Its been running OK since i set it up 2 weeks ago, Tds reading was around 2 so was more than happy. currently out of the tap my...
Been checking your plant selection online over the last 2 weeks looking to place an order however over half of your catalogue is sold out. When do co2 art plan on getting new stock?
Getting very frustrating checking every week.