• You are viewing the forum as a Guest, please login (you can use your Facebook, Twitter, Google or Microsoft account to login) or register using this link: Log in or Sign Up

tmc v2 pro reg, problems please help.

m_attt

Member
Joined
6 Mar 2011
Messages
274
does anyone use the tmc v2 pro reg with a up atomizer?

when i first fitted the atomizer it worked fine, about a 2 days later it didn't appear to be working and was no mist even with the needle valve fully open, also the reg wont seam to get above 0.7/1 bar. have put on a brand new bottle and again the reg still wont go above one bar and the drop checker is also blue.

is this a faulty reg or they just not up to the job of running a atomiser. whats a good reg that will?

many thanks

matt
 
thanks for replying,

main tap? only has the needle valve that can open/close. and pretty sure its on the bottle properly and deffintly no leaks. have got it back on a ceramic diffuser again for now and fully open on the needle valve its enough to hear a very loud hiss of gas going through the line and the diffuser is akin to a jacuzzi.

regards
 
its a paintball tank, so no tap on it, the gauge that shows tank pressure is about 850psi/54bar, the gauge that shows the pressure to the atomizer/diffuser is under 1bar an wont got higher than 1.5 yet when i first had the UP installed it worked fine :/
 
Back
Top