ziggy_909
Member
- Joined
- 4 Jun 2008
- Messages
- 53
hi i am rechecking my EI dosing schedule and have come up with these measurments based on the Nutricalc tool..
i think i need these ppm's
Nitrate (NO3) 20ppm per week.
Potassium (K) 30ppm per week.
Phosphate (PO4) 3ppm per week
Magnesium (Mg) 10ppm per week
Iron (Fe) 0.5ppm per week (from trace AE Mix)
Nutricalc give me these Measurements..
based on a volume of approx 230liter aquarium
co2 injection
2x 54watts as i run now or should i turn all 4 tubes on ...
KNO3 =3.54g X 3 per week
K2SO4=1.62g X 3 per week
KH2Po4=1.00g X 3 per week
MgSO4=9.16g X 3 per week
Trace mix (AE) = 0.62g x3 per week
one question i have is why the K2SO4 is added as there is no mention of it on the ceg4048 tutorial on dry ferts...
also that seems a lot of MgSo4 almost 30grams a week is the correct...and do my calculation look correct...have scales so dont want to make solutions...
i think i need these ppm's
Nitrate (NO3) 20ppm per week.
Potassium (K) 30ppm per week.
Phosphate (PO4) 3ppm per week
Magnesium (Mg) 10ppm per week
Iron (Fe) 0.5ppm per week (from trace AE Mix)
Nutricalc give me these Measurements..
based on a volume of approx 230liter aquarium
co2 injection
2x 54watts as i run now or should i turn all 4 tubes on ...
KNO3 =3.54g X 3 per week
K2SO4=1.62g X 3 per week
KH2Po4=1.00g X 3 per week
MgSO4=9.16g X 3 per week
Trace mix (AE) = 0.62g x3 per week
one question i have is why the K2SO4 is added as there is no mention of it on the ceg4048 tutorial on dry ferts...
also that seems a lot of MgSo4 almost 30grams a week is the correct...and do my calculation look correct...have scales so dont want to make solutions...