• You are viewing the forum as a Guest, please login (you can use your Facebook, Twitter, Google or Microsoft account to login) or register using this link: Log in or Sign Up

D-D Co2 set, coverting to FE?

Thanks for the info:thumbup:
Hi dave I've just had an idea about blocking the hole. If its on the female thread you could cut the female thread down so that the adapter seals at the bottom of the thread rather than finishing half way down before the hole. It will be easier than trying to plug the hole up. You would have to make sure that no bits get into the regulator and you need to cut in the right place though.
 
I have measured the thread length....on both of the adapters.
Approx 8mm on the Aquili adapter.
Approx 12.5mm on the DD adapter.
This will give you a idea if the Aquili will cover the said hole?
davem has measured to where the hole is located..which is approx 5mm..so the Aquili adapter should cover the hole.
Einweg-CO2-Regler M10x1.00 an Standard-CO2-Flaschen
May have the required length of thread also.
hoggie
 
The SIP cylinders from Halfords are £13.99, think I will stick to these for my Rio 125 as they last about 10-12 weeks, but will look into a FE setup for my 240l tank.

Edit: just noticed the Toolstation cylinders are 390g the ones from Halfords are 600g
 
Back
Top