• You are viewing the forum as a Guest, please login (you can use your Facebook, Twitter, Google or Microsoft account to login) or register using this link: Log in or Sign Up

Search results for query: *

  1. Gilles

    MPK solution without phosphates?

    and i thought by having the solution super strong it would immediately turn dark blue...
  2. Gilles

    MPK solution without phosphates?

    I have this wierd problem. I bought 2 different bags of monopotassium phosphate and made a pretty strong solution with it. (>10gr on 100ml water) Both solutions don't measure any phosphates in it using both my PO4 profi test (drop test) and also not with my Hannah PO4 tester (digital). What...
  3. Gilles

    Confused about mineral salts (EC/TDS) concerning shrimp tank

    So yesterday i added 4mg of my R/O minerals to 20l water and got a KH of 1.3 out of it (i use a Salifert KH test) and a μS value of around 169; which is in line with the table above. Would that be a good start? (I have yet to measure the GH value of that water to be honest, see below) p.s. from...
  4. Gilles

    Dennerle 60l with plans to move to 250l...

    Here is the current setup, with 10 Taiwan Bee and 10 Blue Velvet shrimp. Unfortunately, 2 ottos have already died but my guess would be that is because of the lack of plants. One of my berried bee's: And here are the plants in the CO2 tank, to be transferred to my main tank this week:
  5. Gilles

    Confused about mineral salts (EC/TDS) concerning shrimp tank

    Question; i have bought an HM digital AP-2 tester to measure my conductivity of my R/O water unit. I want to (only) use R/O for my new tank and i want to get it up to 3.5 Kh. If i look at the manual from Dennerle Remineral+ for example it states: So adding 10g to 100l gives you: 1.3 Kh 2 dGH...
  6. Gilles

    Dennerle 60l with plans to move to 250l...

    Yesterday i hooked up the Thermostat protection device. Basically it is just a relay/switch with a temperature sensor. I have configured it such that below 27 degrees it turns the socket on, and above it it will be turned off. If i then connect the Hydor heater it can never 'boil' my fish in...
  7. Gilles

    Dennerle 60l with plans to move to 250l...

    Well this is the current setup (with the old light and old (corner) filter); As you can see, quite some surface film already; the surface skimmer on the OUTFLOW (video review of it) also prevents little shrimp to end up in my filter.
  8. Gilles

    Dennerle 60l with plans to move to 250l...

    As in, not the default Eheim pipes? I was actually planning on using glass pipes as outflow, with a surface skimmer on it, like this one: But this comes with 2 problems: 1) The skimmer can be sucked down if you have to much flow (meaning you have the chance that little fish and shrimp get...
  9. Gilles

    Dennerle 60l with plans to move to 250l...

    Hi @ScapingScotsman unfortunately that is a 'different' Gilles. I own and operate the Dutch fertilizer webshop, the other Gilles owns and operates the blog and a Belgian fertilizer webshop. However we are named the same which sometimes generates confusion.
  10. Gilles

    Dennerle 60l with plans to move to 250l...

    Bump.. anybody? In the meantime i've acquired the following (future proof) hardware for the tank: Milwaukee MC122 pH controller 6kg CO2 tank Dennerle CO2 solenoid + non return valve Hydor inline heater 300w (1) AQUARIO Neo Flow In-/Outflow Set Premium + filter guard Twinstar light III 450SA...
  11. Gilles

    60L Nano Cube build

    Aren't you worried the filter flow would be to much for this tank?
  12. Gilles

    Dennerle 60l with plans to move to 250l...

    Hi all! In the past I've had multiple aquariums equipped with either sumps and sand filtration or external filters, all of them combined with massive PVC plumbing and 'bored out' AquaMedic 1000 reactors to increase flow. Some even had automatic water change with RO based on water sensors. I...
  13. Gilles

    ADA Amazonia when to use Pumice / PowerSand?

    In the project "The World’s Largest NA Project" Amano used different techniques.for layering the substrate. They start with volcanic rock and fill the gaps with Pumice; I get the part that they want to fill up the gaps in the volcanic rock, like shown in this screenshot; But what confused...
  14. Gilles

    Sera Mineral Salt formula changed?

    Does anyone of you know if the formula for Sera Mineral Salt changed? I bought the product before to raise both the GH and the kH of my RO water, but now it says on the packaging that it does not affect KH (anymore?). Does anybody know more?
  15. Gilles

    WTB: dual stage regulator, need some advice

    I want to buy a new CO2 regulator, and i am thinking of buying a dual stage regulator while i'm at it. Now i have a few conditions; it must fit a EU CO2 cillinder (DIN477 / W21.8) and it must be powered by a 240v Solenoid. I've found this one, claiming to be a dual stage regulator, but neither...
  16. Gilles

    CO2 through external (NW) pump, merge return with main filter?

    Any advice on the canister vs wet/dry discussion which is in my head? :0
  17. Gilles

    CO2 through external (NW) pump, merge return with main filter?

    I think a lot personally. but i haven't ordered the NW yet. I just bought the clear 20" tall housing for now. I have decided that i will be using something like this so before it is delivered (will take some time) i will have answers to my remaining question with regards to flow, because... I...
  18. Gilles

    CO2 through external (NW) pump, merge return with main filter?

    What was it supposed to do? And where did you buy it? I can't find it anywhere at least not for that price (60 quid) And by the way, isn't 10" (i assume that is the diameter)? HUGE? or is it 4.5? ?
  19. Gilles

    CO2 through external (NW) pump, merge return with main filter?

    And that works with a cerges reactor? Did you reverse/connect it? E.g. the atomizer connects to the "OUT" of the filter housing and the water to the tank goes out the IN connection of the filter housing? e.g. this baby?
  20. Gilles

    Fish swimming eradic with disturbed substrate (EI)

    I thought you where aiming for that :)
  21. Gilles

    CO2 through external (NW) pump, merge return with main filter?

    Well there you have a point.. At first i was like; both methods (normal or reverse flow) are exactly thesame with regards to water flow, but i now get your point. With "inline" diffusing, what do you mean? Like with the AquaMedic "T", with an atomizer or with a NW pump? I ordered a 10" unit...
  22. Gilles

    Water flow in the planted aquarium?

    Well i like the idea of a spraybar as it does not give much current in my tank. Reason for opting for a second spraybar is this; if i put the outlet of the co2 in one corner and blow it in thesame direction as my spraybar (e.g. horizontally across the length of the tank) i am afraid that my...
  23. Gilles

    Fish swimming eradic with disturbed substrate (EI)

    It was 6.5 but that doesn't say you anything special :) it's now 6.7..
  24. Gilles

    CO2 through external (NW) pump, merge return with main filter?

    Are you sure? I was thinking that the increased dwell time (since the reactor is large in diameter) it would allow the co2 to have more contact time with the water. If i use the clear water filter housing as it is designed (e.g. inflow IN, then outflouw going OUT, but with a pipe to the bottom...
  25. Gilles

    Water flow in the planted aquarium?

    While thinking of adding a NW pump i was doubting how to place the outflow of that NW. If i read this entire thread correctly, i would have to place the outlet of the co2 enriched water just like the filter outlet, across the entire length of the tank, but with slightly larger holes, to prevent...
  26. Gilles

    Fish swimming eradic with disturbed substrate (EI)

    Ok, one step further.. today i measured my PO4/NO3 levels, just to rule that out (since i had BGA and i got that in the past by having excessive nitrates). Turns out; PO4: 1, NO3: >100mg/l Ok so that explains why my shrimp are dying and why i have BGA. I think.. So i did another WC today and...
  27. Gilles

    CO2 through external (NW) pump, merge return with main filter?

    thnx, will go for seperate outlets. however; how would i go about this then? I currently have the filter outlet as spraybar across the entire length of the tank facing forward. @ceg4048 how should i position my co2 outlet? 1) At the front of the glass from one side pointing to the other side? 2)...
  28. Gilles

    Fish swimming eradic with disturbed substrate (EI)

    @Edvet they immediately recovered when the tank was full of fresh water. It ONLY happened when uprooting plants. However Nitrite should not be possible in a cycled tank, right? Is Nitrite also causing BGA?
  29. Gilles

    DIY Project High flow DIY reactor - now with video

    ps. see here; http://www.ukaps.org/forum/threads/co2-through-external-nw-pump-merge-return-with-main-filter.35210/#post-377505
  30. Gilles

    Fish swimming eradic with disturbed substrate (EI)

    lately I have lost a lot of amano shrimps. After talking to Chris Lukhaup (who i know personally) on a fair last weekend he told me that the Amano shrimps could suffer from a bacteria, especially since other fish didn't seem to be affected. So yesterday i decided to uproot some plants while...
  31. Gilles

    CO2 through external (NW) pump, merge return with main filter?

    Maybe @ceg4048 and @foxfish as subject matter experts have a say in this? :)
  32. Gilles

    CO2 through external (NW) pump, merge return with main filter?

    I was thinking of adding an Eheim Compact+ Marine pump on a seperate inlet for CO2 enrichment. This is a NW pump (venturi style), followed by a clear water filtering housing to increase dwell time and then join the return with the Fluval FX6 output to the main tank. Would this work? Returns...
  33. Gilles

    DIY Project High flow DIY reactor - now with video

    @foxfish thinking about not modifying my Fluval FX6 but just adding a new pump to power the external reactor. Is it possible to "merge" the return flows of both filters together?
  34. Gilles

    Light spectrum tweaking help for optimal growth

    I have LEDs :)
  35. Gilles

    Light spectrum tweaking help for optimal growth

    @ceg4048 after thoroughly reading the following sites; 1) http://www.hallman.org/plant/huebert.html 2) http://www.aquaticplantcentral.com/forumapc/lighting/38014-lighting-spectrum-photosythesis.html Especially after reading (2) i am now more knowledgable on the subject and i can see how i can...
  36. Gilles

    Light spectrum tweaking help for optimal growth

    I also wonder if my BGA which still occurs even after doubling the NO3 in my EI mix caused by some wavelength i am pushing... ?
  37. Gilles

    Light spectrum tweaking help for optimal growth

    Please find attached a color spectrum of the lights i currently have. As you can see by the graphic, i can tweak each channel to my likings, resulting in a different spectrum, a different output in Lumen and a different wattage. I also have the possibility to show Clorophyl A, Clorophyl B and...
  38. Gilles

    EI results in BGA; is my macro solution correct?

    yes, Blue Green Algae, not black brush algae :p i don't have BBA anymore since i fixed my CO2 issues :) Flow cannot be the issue here; the spraybar is across the entire tank length; pointing towards the front glass, holes are drilled based on the output of the filter and the Eichinodorus...
  39. Gilles

    EI results in BGA; is my macro solution correct?

    My container is currently 1000.0mL; i add into 1 mix: - 57g KNO3 - 7g KH2PO4 - 83g K2SO4 - 169g MgSO And i dose 240.0 mL /week (spread across 3 dosages of 80mL) into a 400.0L tank. This gives: - NO3: 21ppm/week - PO4: 2.9ppm/wek - K: 22.3ppm/week - Mg: 10ppm/week If i enter these values at...
  40. Gilles

    CO2 stability, brush algae and EI water change

    I think Edvet was referring to plants in relation with a waterchange :) @Edvet i removed the wooden airstone this morning and replaced it with a GLA bazooka.
  41. Gilles

    CO2 stability, brush algae and EI water change

    Yes i know but i first have to get my co2 injection in order before i try to switch to this kind of co2 distribution. Also true :) This was the answer i was looking for, since doing it midday causes co2 instabillity! How long before lights go off do you stop co2? Which i now have... So if i...
  42. Gilles

    CO2 stability, brush algae and EI water change

    So i have Akadama, on some spots i am getting brush algae. Water is injected through a spraybar and it seems that the brush algae is appearing only on the ends of the spray bar where water circulation is less then in the rest of the tank. So you'd think that it is the water circulation but i...
  43. Gilles

    Aquatoon

    Wouldn't you get a huge reflection in the window if you flash also from the front?
  44. Gilles

    Can you have CO2 deficiency with green drop checker?

    So i just finished with my first plumbing changes. I removed the AM1000 reactor and installed a ADA Pollen Glass 30mm below my Fluval FX6 filter intake. Besides the fact that my Fluval does not resonate anymore because of the removed AM1000 (less noise, jay!) i also managed to remove 2x20mm 90...
  45. Gilles

    Can you have CO2 deficiency with green drop checker?

    check, will report back on saturday somewhere with some results.
  46. Gilles

    Can you have CO2 deficiency with green drop checker?

    With Pre-gas-on pH you mean; the pH of the tank before i start injecting CO2. right? And i should make you a graph of the pH values during the day with my new non-ph-controlled CO2 setup for you to determine if i am on the right track?
  47. Gilles

    Can you have CO2 deficiency with green drop checker?

    Define usefull; is a kH around 3 to 4 and gH around 6-8 usefull enough? yep, ashamed.. got me :p What is the better option to get the CO2 into the tank? Adding a ceramic disc beneath the intake (micro bubbles, but cleaning) or adding a CO2 tube directly into the filter intake? I really think...
  48. Gilles

    Can you have CO2 deficiency with green drop checker?

    hehe just read your comment in this thread; http://ukaps.org/forum/threads/best-and-simplest-way-to-inject-co2.27268/page-2#post-284469 Immediately i thought; "Hmm..." So next question i have for you; I have a Fluval FX6 with 25mm inner diameter filter hose (the motor is at the bottom of the...
  49. Gilles

    Can you have CO2 deficiency with green drop checker?

    Ceg; Thank you so much for your help. The day before yesterday i lowered the PH from 6.4 to 6.2 and yesterday the drop checker was still green so i lowered it to 6.0. With regards to Bromo Blue; I have a bottle of ADA drop checker fluid which basically says; add 1 drop and fill up with with...
  50. Gilles

    Can you have CO2 deficiency with green drop checker?

    Interesting... So, what should i aim for if i'd go for the continues flow of co2? Start 1 or 2 hours before photoperiod and make sure it is dropped 1 full point when lights go off? Should i start with green and end up yellow, or how can i tune the CO2 distribution when i don't have a pH pen to...
  51. Gilles

    Can you have CO2 deficiency with green drop checker?

    My fish are currently fine, i am just worried that the amount of co2 i have to add is more if my kh is lower; or is that a mistake in thinking? In other words, ignore ph, focus on a (freshly filled) drop checker? makes me wonder if i should step away from pH controlled CO2 and go for continues...
  52. Gilles

    Can you have CO2 deficiency with green drop checker?

    The more i read on this forum, the more i come to understand that in my current tank CO2 and flow are the only fractions i have yet to tune.. So this quote got me thinking; Especially the last sentence of this part is what intrigues me. I think that the reason people advise to improve flow is...
  53. Gilles

    My wood won't sink

    @tim; i need a concrete tile of about 10kgs to get it to sink in the current state :p Yes ed, "Kienhout" will post a pic as soon as i get to it :p
  54. Gilles

    Diy spray bar! I need help!

    good advice Ed
  55. Gilles

    My wood won't sink

    Well still no sinking noticed. Got myself a big soup pan and i will be boiling the wood tonight to see if that adds any progress. If not i will be drilling the wood to make it hollow from the inside.
  56. Gilles

    Diy spray bar! I need help!

    I will be making two versions of 25mm piping; 1 with 5mm holes (20 square mm) and 25 holes. 1 with 6mm holes (28 square mm) and 17 holes. If i read ceg correctly, you'd want the streams to hit the front glass, then it is mission accomplished :)
  57. Gilles

    A few qs about GH BOOSTER

    Ok, got it. So i was looking at this page; and given the information in that thread they say; Assuming the above percentages are correct; 3.3g CaSO4 results in 6.666 mg/l Mg 3.3g MgSO3 results in 9.702 mg/l Ca So when i calculate the given grams with the formula above; [4.1 x (6.666 Mg ppm) +...
  58. Gilles

    A few qs about GH BOOSTER

    Well based on my e-mail conversations with Marcel Goliaš (who has an excellent Nature Aquarium website on all things related to water, nutrients and chemistry) i've come up with a little tool. I've created an Excel sheet in which i can enter my target KH and GH and it will calculate the amount...
  59. Gilles

    A few qs about GH BOOSTER

    Sorry to bump up an old thread; but i am using Duradrakon to enrich my R/O water. I'm aiming for about a KH of 3.5 and GH of 5-6. Problem is that Duradrakon on its own adds both KH and GH to the water. So upping the KH to 3.5KH equals adding only 4.5GH. For this i need to add 12.6 grams of...
  60. Gilles

    My wood won't sink

    So i have this huge ass lump of driftwood, i think it measures about 25x25 at the base and goes into a mountainy shape. Problem is however, it won't sink! It is in a butt outside with a bag of aquarium sand on top (10kg) to keep it submersed below the water surface and has been so for over a...
  61. Gilles

    Cliff of Spirits

    Really great tank and wonderfull pictures! Did you mention something about your camera/lens/settings and technique for shooting those pics? I think i missed it.. :p
  62. Gilles

    HOWTO: increase surface skimmer (OFA) throughput

    Works perfectly, but not for a Fluval FX6 :) to much power.
  63. Gilles

    CPR overflow on Fluval FX6

    Tonight i am going to switch back the old intake, see what that does to my flow; will post a pic here.
  64. Gilles

    CPR overflow on Fluval FX6

    I like the FOC thingy :) But seriously; why am i having so much surface scum? Currently have my plumbing like this; My filter intake is this and connects to PVC pipe diameter 20mm which runs behind my tank. It has 3 bends of 90 degrees before it enters the Fluval. From the FX6 a sillicone...
  65. Gilles

    CPR overflow on Fluval FX6

    Well i currently have surface scum; so i attached a surface extractor to my canister filter but the fluval extracts more then the surface extractor can deliver so the surface extractor is pulled down, causing more surface scum to form. I am thinking of either; 1) Adding an Eheim Skim 350...
  66. Gilles

    CPR overflow on Fluval FX6

    It is rated at 800gph and my Fluval can pump 925gph unrestricted but filter circulation is set to be 563gph; so i think my pump can handle it :) Besides it also goes through a co2 reactor which limits flow considerably.. I'll think i'll just test it first before i re-rig my tank :)
  67. Gilles

    CPR overflow on Fluval FX6

    Is it possible to attach a CPR overflow to a Fluval FX6 e.g. would it work?
  68. Gilles

    Diy spray bar! I need help!

    Won't the velocity be the same as with 1x 25mm output (since surface is equal)? What would be your suggestion?
  69. Gilles

    Diy spray bar! I need help!

    Ok, let me get this straight for a non native English speaker. I have a Fluval FX6, which has 25mm hose. To calculate the area of a circle, i have to multiply the square of the radius by Pi (which comes down in Excel to the following formula if i am correct) which returns ~490...
  70. Gilles

    Aquatoon

    Hi Toon, how the heck do you get such great macro photos? Camera/lens/flash details pleaeaease!
  71. Gilles

    Water movement, surface scum and biofilm in my tank

    So i've bought 2x 3/4" locline with flare nozzles; going to remove the AM1000 tomorrow, empty it, clean it and put it back together see if that makes a difference, i would guess so.
  72. Gilles

    Water movement, surface scum and biofilm in my tank

    Hi Alastair, all is fine thanks for asking. I am thinking of replacing the AM1000 (which has 16/22 connection) with a DIY one, which has connections matching the hose diameter of the FX6; which will basically be an empty acrylic long tube. CO2 will accumulate but flow won't be blocked. The FX6...
  73. Gilles

    Water movement, surface scum and biofilm in my tank

    I have a Fluval FX6 attached to my Aqua Medic 1000 reactor (currently still filled with bio balls). I have 2 problems at this moment, but plants are doing great! 1) After cleaning my filter, i always get some bio film (either attached to the bio-balls in the AM1000 reactor or still present in...
  74. Gilles

    Interzoo 2014, anybody going?

    So i'll be off wearing my UKAPS shirt to Interzoo this weekend, i'll be there on saturday; anybody else going?
  75. Gilles

    Pure laterite

    Ok; well they ship it to anywhere you want basically.. You could ask them.
  76. Gilles

    A little inspiration.

    Nice!
  77. Gilles

    Could you all please help me to win a GHL foto contest?

    Price with protected cover: Price without protected cover and turned on:
  78. Gilles

    tank idea - ramblings of a want-to-be 'scaper.....

    Nice idea and can't wait to see how it 'folds out' hehe
  79. Gilles

    New 495 Gallon Planted tank - 240x120x65 cm - 1872 liter

    Wohly sh*t that is one huge tank! Do you do automatic water top off?
  80. Gilles

    Hello from Holland

    And if you need a Dutch supplier of aquarium fertilization (NPK/Micro/carbo/etc) go to Welkom bij Aquariumbemesting.nl
  81. Gilles

    Alpine Gardens

    Hi Too, few questions: 1) If i calculate this tank dimensions correctly (are they in inches?) then it would yield to: 188cm wide x 112cm deep x 62cm high but that doesn't seem to reflect on the picuture. Am i correct on the sizing? 2) Can you comment on what fertilizer regime you used? E.g. how...
  82. Gilles

    The Lovely World of Bucephalandra!

    Wonderfull article Vasteq!
  83. Gilles

    Pure laterite

    p.s. aquariumbemesting.nl sells it if you are from holland
  84. Gilles

    HOWTO: increase surface skimmer (OFA) throughput

    Since when i got my new filter (Fluval FX6) i noticed that my surface skimmer had trouble keeping up. So i needed to increase the throughput of my so called "Oberflächenabsauger" which is German for 'surface extractor'. Without to much of a introduction here are the steps i've done, it took me...
  85. Gilles

    3 Peaks (Nano)

    Nice work!
  86. Gilles

    Barley straw

    Yes i did, lost all my amano shrimps; why? I think i put to much in the filter; so be carefull.
  87. Gilles

    Could you all please help me to win a GHL foto contest?

    Well it was not easy to find out but i ended up with 2x Mitras Lightbar 160 for tank 159 - 170 cm (max. power consumption: 96 W) LED-configuration per 10 cm Lightbar 5 color channels: 2 x Cree XBD 6500 K 2 x Cree XBD 4500 K 4 x Cree CLV6A, red 622 nm, green 530 nm, blue 472 nm Mid color...
  88. Gilles

    GHL Mitras Lightbar - What do you need?

    Hello, I hope to write down the information i currently have to help some other customers with the proper GHL products you need to buy in order for dimming Mitras Lightbars with the Profilux. Note; this ONLY applies to configuration 3 like shown here: Mitras Lightbar (configuration 3)...
  89. Gilles

    Could you all please help me to win a GHL foto contest?

    LEDs are ordered, i hope to receive them within 2 weeks
  90. Gilles

    300L pseudo-Dutch style Planted Tank

    Cool idea Jose!
  91. Gilles

    Could you all please help me to win a GHL foto contest?

    I won! First of all i was 3rd in place and won 250 euro's but yesterday they disqualified the persons at place 1 and 2 for reasons not mentioned. So now i can say that i won 1000 euro in vouchers! I will spend them on LED lighting i think and maybe on a new dosing unit if i still have spares.
  92. Gilles

    Utopia - 60l - 2014.06.05 - Kids trimming Montecarlo :-)

    Cool, if you have any more information or websites with demos i would love to learn how to do it! So far i've found: Nesting sequences | Learn Premiere Pro CS6 | Adobe TV Warp Stabilizer | Learn Premiere Pro CS6 | Adobe TV But does the warp stabiliser also help with your moves from for...
  93. Gilles

    Utopia - 60l - 2014.06.05 - Kids trimming Montecarlo :-)

    Hi Pedro; great videos! Did you use a DSLR cam for filming this and did you use a rig for the motion effects? Can you share some tips?
  94. Gilles

    Red Glossostigma elatinoides

    It seems to color red due to high amounts of light and cold water; at least that is what i've seen on Facebook.
  95. Gilles

    Dynamic Profilux 3 'status' signature.

    Well, if all is correct you should see the status of my tank in my signature :) This is done by a cron job which regularly updates the picture based on actual Profilux readings (through a PHP script). If the pH rises above 7.2 i will receive a push notification on my mobile phone. A pH of this...
  96. Gilles

    DIY Project High flow DIY reactor - now with video

    Well the FX6 is totally blowing away the co2 in my AM1000; i see mist in my tank which i never saw before :) The FX6 tube size is i think 25mm; which connects to 20mm eheim tubing which then goes through the 16mm port of the AM1000 so this makes sense that flow is to high (a lot of pressure)...
  97. Gilles

    CSM+B chemical formula

    Sure, tell me (in PM) how much you need; i sell the stuff (imported it myself from the original manufacturer in Canada)
  98. Gilles

    DIY Project High flow DIY reactor - now with video

    Any updates? I currently have a aquamedic 1000 (previously attached to an Eheim 2178) and now i have a Fluval FX6 which has way more output so i need a new co2 reactor :)
  99. Gilles

    Andys HC propagator step by step

    I just bought this one the other day; WIthout the dimmer (on the left) but with the temp/timer box; This has a temperature meter attached to it. This one is sticked deep in the substrate; which now measures 28 degrees (no plants yet); water is much higher; 35 degrees maybe? I have now put it...
  100. Gilles

    Andys HC propagator step by step

    Andy; what temp is the water at inside the propagator, can you measure it?
Back
Top