Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
You are viewing the forum as a Guest, please login (you can use your Facebook, Twitter, Google or Microsoft account to login) or register using this link: Log in or Sign Up
Hi Diane,
As you got this second hand does it have the correct Aquaone pump with it? It should have the same sump as the Aquanano 80 which I have, in reference to Hoggies post, there is no flow control if you have the same pump as me.
I think it's an electronics issue too. I've already done what eheim suggest and it makes no difference. If it was s mechanical problem I'd expect the flow to be erratic / low in manual mode and it isn't.
I do have another 2078 pump head that I will fit over the weekend with parts from the...
If you are happy with the reply then stick with it. I would just call John Allen aquariums (eheim uk distributor) and question the impeller. All my eheims have had a six blade version so just check the 3 blade one is correct.
It's a tough call. If it were me I'd return it on the basis that it doesn't sound like the seller looks after his kit. We don't know why the fuse blew and how low long has it run with a lashed up fuse and it should never have had a 13A one fitted in the first place? It could be something with...
Even if it says no returns you should contact the seller to say you are not happy. If you can’t resolve it then raise it with eBay, they are good at sorting this kind of thing out. Also, if you payed with PayPal you should be covered.
It certainly sounds better but to me it still sounds noisy. That said, I've just taken video of a 2324 and a 2078 and the video audio sounds far noisier than what it does when listening 'live'. I'd still do the bucket rest if I were you.
In the second picture it looks like there is a dent in the floss media that looks like it was made by the impellor part of the pump head. This basket should be covered by a green grill, do you have this fitted and have just taken it out for the picture?
OK. I think that means that the pump can't output the selected flow. You may have seen this but the manual says to check the following:
Filter polluted.
Lever not set to fully “ON”.
Hose lines polluted.
Hoses buckled or too long.
Too many additional devices in the hose system (e.g.: CO2, UV...
The manual for my 2324 says the following:
(23) Tip: The water flow from the pump can be controlled by using the tap only on the pressure side (OUT).
I know yours is a different model but on the basis above I would imagine you are OK to restrict the output.
Sacha, plenty of people prime these without having additional taps etc. If everything is empty then do the following.
Make sure the valve on the filter is off.
Make sure the spray bar / outlet is above the water line.
Disconnect your hose from your tank intake and fill and hose with water...
I run a 2078 but only use the top two trays. I got rid of the mech pro. If you are going to use it stick a net over it or something or every time you do your maintenance it just floats up. The pre filter catches most of the large stuff.
The 2075 is the quietest filter I've used so something is up with it.
Just checking the obvious but is it level and is the non return float in the right way?
Has it got all the rubber feet on and have you tried putting something under it to see if it makes a difference? I was at a friends yesterday who has one and you didn't even know it was on it was that quiet, so something is wrong here.
I used one for a couple of moths (just as a spare) and thought it was quite good. Maybe someone with more experience of it can post up.
Should you want one I'm looking to sell mine as I don't have a use for it.
What I was trying to say is can't you cut your shepherds crook on your waterline, join the two pieces with flexible hose and then just rotate the cut piece 90 degrees?
I think I understand. Cut the shepherds crook near the end. Join the two pieces with a bit of eheim tubing and then you adjust to what angle you need.
I can post a picture if the above isn't clear.
I think your reg is an HSL one. See how you go with straight injection and if you want to try the UP I can post it too you. Then you can evaluate it and decide if you want to buy one.
I found it good. You can see your flow pattern and where the CO2 is going. I'm still using one, the other is just a spare and would fit your set up.
As Foxfish has mentioned you will need to run above 2bar to get this to work. Do you know if your reg has adjustable working pressure? If not...
I've used an ex marine filter on freshwater. I just gave it a scrub to remove the salt deposits, rinsed the head out a few times in warm water, put my media in and ran it.
I had similar problems in that the lip at the top of my tank meant that fixing to the back glass was difficult. This picture doesn't look too pretty but while I was experimenting I ended up with something like this:
Don't know if this is of any help to you?
Eheim green. As far as I know all the standard piping on their filters are green apart from the installation sets that you can by - I think they are smoked grey.
The main difference is the flow rate. The Ecco Pro is rated at 600LPH and the Proffesional 3 at 950 LPH. The professional also takes morre media. I've not used any of the Eco Range but have used the Professional 600 and 2078. The 600 was the quietist filter I've ever 'not' heard :lol: Hopefully...
Re: Help with non-functioning eheim 2180 after impeller clea
When refitting the impellor I always fit the shaft into the pump housing first, then the imepllor and end cap. When my hoses are full I just lift the outlet above the waterline and open the valve. Once its full, switch on and press...
Re: Help with non-functioning eheim 2180 after impeller clea
Sounds like either air in the filter or you haven't located the impellor properly. Th white impellor shaft sits between two rubber fittings. When you take the impellor out these may stick, one in the impellor cap and one in the pump...
Not had time to do the videos today but here is one from youtube:
http://youtu.be/GS2mpRSLKOE
The noise of the filter in this video is exagerated but you will hear the pump cycle up and down.
Re: Eheim Pro3 2075 (AS NEW, only used 2 days)
What put you off the JBL 1501 Greenline? I looked at these before I got the 2078. At one point Zooplus were doing them for about £85.
Re: Eheim Pro3 2075 (AS NEW, only used 2 days)
Yeah, good points Alastair. The 2078 is quiet but the 2075 is silent. Having said all this I don't have any plans to change mine, but if I needed a replacement I would choose a different route.
Re: Eheim Pro3 2075 (AS NEW, only used 2 days)
Your tank is simlar to mine volume wise. It's a nightmare getting the right kit. It's also a shame the 2078 head doesn't fit a 2075 cannister, I could have sent you a spare to try.
Re: Eheim Pro3 2075 (AS NEW, only used 2 days)
To be honest I wouldn't want this in my bedroom running at full tilt. It's a background hum, you might get used to it, in auto mode or reduced flow its probably OK. Maybe max flow during the day and reduced at night would be the answer?
I would...
Re: Eheim Pro3 2075 (AS NEW, only used 2 days)
As far as noise goes my mate had a 2075 and it was silent. I'd have to put my ear to it to notice any noise. In auto mode the 2078 is fairly quiet. You can hear it but it doesn't cause a problem. In manual mode, where you can increase the flow, it...
As Above call John Allan Aquarium. If its leaking where the pump head meets the cannister they might just send you a seal kit. I think the 'known' leaking applied to 2071, 73 and 75 pump heads. 2076 and 2078 were not affected.
Have recently used John Allan and got excellent service :thumbup:
I've not measured the LPH on my 2078 and I have nothing similar to compare it with. What I will say is that when I extended the spraybar to twice the length I was dissapointed that the velocity dropped so much and I've since made my own modfified spraybar.
Have you run them both media less?
Thanks Alastair. I had a further look at both pieces of spraybar tonight and noticed that the original 2078 300mm spray bar, which is it the far end of flow, has 4mm holes. The new 400mm section, which is closest to the pump outlet, has 3mm holes :oops: This obviously hasn't helped :lol:
OK, I've fiddled around with masking holes. It's better but not great. What I can say is that all the plants have some gentle movement on them. Will this be OK I do I need to keep working with the uniformity?
These lever lock units on the pro 3 series really seem to be the weak point. I wonder what causes them to siffen up? Can you take them apart to repair / maintain them or is it a case of a new unit?
The older design that is on my 2324 filter (2 levers) is free as anything, but my 2078 causes me...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.