• You are viewing the forum as a Guest, please login (you can use your Facebook, Twitter, Google or Microsoft account to login) or register using this link: Log in or Sign Up

Search results for query: *

  1. hotweldfire

    Stumpy filter?

    Thanks for the replies. DavidW: do you mean using two sets of inlets/outlets? I'm afraid the tank is too small for that. Or do you mean using some kind of splitter to combine the flow of the two filters. Vador: I think I would have the same problem with that filter I'm afraid. I believe they...
  2. hotweldfire

    Stumpy filter?

    Hi All, Got a rather specific requirement. Because of space/aesthetic limitations I need a filter to run a 30cm cube that a) has to sit underneath the tank and b) has to sit on a shelf 27cm high with a bunch of books in front of it too (see below). 2016-07-14 09.24.53 by hotweldfire, on Flickr...
  3. hotweldfire

    EMERGENCY: Eheim flow lever jammed

    [Know your pain - Glad it's sorted! Murray :) Thanks Cheers fella. Wife and kid away visiting the in laws hence the rescape. Therefore likely to be back on only for the next couple of weeks ;)
  4. hotweldfire

    EMERGENCY: Eheim flow lever jammed

    Phew Also, the flow on this thing is phenomenal. I know it's clean (and there's nothing in the chemical filtration unit) but still. It's rated as a tiny bit faster than my eheim but appears to be running significantly faster than my eheim and Koralia 900 together. I've had to turn the latter...
  5. hotweldfire

    EMERGENCY: Eheim flow lever jammed

    Well, it would have to happen during a major rescape, wouldn't it. So tank full of crap after stirring up the substrate. Doing lots of big water changes and running a koralia with an air stone underneath it. Happily I still have a fluval g6 I bought off George Farmer a couple of years ago but...
  6. hotweldfire

    EMERGENCY: Eheim flow lever jammed

    I can't believe this has just happened again :mad:
  7. hotweldfire

    Recommended filter for a nano tank 30l

    Best of luck with that. The boyu is the cheap Chinese knock off I had. Ran fine for a week then kept getting trapped air in the intake and choking up. Tried everything but couldn't fix it. Hope yours runs better. Sent from my Nexus 4 using Tapatalk 2
  8. hotweldfire

    Recommended filter for a nano tank 30l

    I use eden 501s (using 2 at the moment) . These are available from aqua essentials as well as the larger models. Brilliant filter but you do have to run them at the same level as the tank else the flow drops dramatically. About to put one up for sale as it goes with lily pipes etc. Stripping...
  9. hotweldfire

    Shrimp safe 9mm

    Mesh got clogged up fast. Am currently using a sponge made for the intake on those edge tanks. Too big but chopped it in half and secured with zip ties. Anyone know of a source for 9mm lily pipe cap please do let me know. Sent from my MB860 using Tapatalk 2
  10. hotweldfire

    Shrimp safe 9mm

    Give us a link? Sent from my GT-P7310 using Tapatalk 2
  11. hotweldfire

    Shrimp safe 9mm

    How do you both attach? Just tie it on? I would like something I can remove each week easily and rinse clean.
  12. hotweldfire

    Shrimp safe 9mm

    Anyone know where I can get a shrimp safe cap to fit a 9mm lily pipe intake? Sent from my MB860 using Tapatalk 2
  13. hotweldfire

    Aquaclear 70 HOB Filter

    When I was after the 100 I had to buy in from HK via ebay. ADC told me they aren't sold in the UK anymore. Shame, great little filters. Sent from my MB860 using Tapatalk 2
  14. hotweldfire

    best cheap filter for a nano tank?

    Lads, I had a HOB. An aqua one 100 or whatever they're called. Great filter, totally flattened my hairgrass. Been looking for a HOB with a spraybar attachment but only ones available (off ebay) are way over powered for a 12l. May give the Boyu a try anyway.
  15. hotweldfire

    best cheap filter for a nano tank?

    Nah, had a HOB Ryan. Keeps flattening my hairgrass. This is what I'm using at the mo but as you can see a bit oversized for the tank you gave me. 2012-7-8_12.53.45 by hotweldfire, on Flickr
  16. hotweldfire

    best cheap filter for a nano tank?

    That's a bit worrying, especially as it's for a tank on my office desk. Leakage during the night whilst surrounded by computers etc would not do my career prospects much good.
  17. hotweldfire

    best cheap filter for a nano tank?

    Sorry for the necromancy. Gill - is the boyu adjustable? Bought an Eden 501 for my 12l and found it too strong even when I added taps. Sent from my MB860 using Tapatalk 2
  18. hotweldfire

    HOB with spraybar?

    Yeah, I think it's actually the same one. Seen it sold under a third brand name and looks identical. Thanks, Eheim is interesting. Have seen these online before and discounted them 'cos I assumed they were rather big but actually look really small. Will want to see one in the flesh though.
  19. hotweldfire

    HOB with spraybar?

    Anyone come across one of these? This is the only one I've found but way over the top for my 12l. Need something smaller. http://www.ebay.co.uk/itm/Up-Aqua-Exter ... 2541wt_952
  20. hotweldfire

    RO unit?? Need educating

    Got mine (also off ebay) connected to the garden hose tap. Unfortunately, I found out from my last water bill that I am on a meter :shock: :jawdrop Apparently there's a hosepipe ban in the SE coming soon?
  21. hotweldfire

    Eheim pro3e 2078 problem

    Here you go http://ukaps.org/forum/viewtopic.php?t=18458 Sent from my MB860 using Tapatalk
  22. hotweldfire

    Eheim pro3e 2078 problem

    Yeah. If you disconnect the tap unit from the filter then make sure inlet/outlet are out of the tank you can then switch the tap to on position. Ball valves which are white should not be blocking. The tap on my filter head was a bit sticky from day one. One night I got home and found the flow...
  23. hotweldfire

    Eheim pro3e 2078 problem

    Is the flow lever a bit stiff? Might be the ball valves - my 2071 lost almost all flow recently and that was the cause. Sent from my MB860 using Tapatalk
  24. hotweldfire

    EMERGENCY: Eheim flow lever jammed

    Thanks all. Because of your advice I kept casualties to a minimum. 1 crs and hisonotus which were already dead when I got home and then only 1 breviata over night.
  25. hotweldfire

    EMERGENCY: Eheim flow lever jammed

    Tried to get the lever unit out with a screwdriver but would not budge. Much respect to ADC, they gave me a new filter head. Going to get it up and running now. Rudedogg, where did you get the spray?
  26. hotweldfire

    EMERGENCY: Eheim flow lever jammed

    Thanks for the advice all - has been followed. Am aiming to get a new filter this morning. Minded to avoid another eheim but I expect I'll have to make do with a direct replacement from the LFS I got it from.
  27. hotweldfire

    EMERGENCY: Eheim flow lever jammed

    Whoops. Tried wiggling it to see if I get it further off and have only succeeded in snapping the lever. Am going to have to buy a new one first thing in the morning. Will the fauna and bacteria be ok until then? If not, anything I can do as a temporary setup? I don't have a spare filter. Only...
  28. hotweldfire

    EMERGENCY: Eheim flow lever jammed

    Nah mate. Feels like there is but it's just the lever bending. Totally jammed in the off position. I could try to force it but am pretty certain I'll snap the lever.
  29. hotweldfire

    EMERGENCY: Eheim flow lever jammed

    Sorry for the drama all but I have a serious problem. Came home tonight to find the flow from my external (Eheim pro3 2071) down to a trickle, CRS lying on their back and a dead hisonotus. I'm assuming the casualties are from no surface movement but not sure. Opened it up, cleaned impellor etc...
  30. hotweldfire

    Advice for external heated filter....

    Clive, I think what people were saying to me was that if the filter went then you'd have a useless heater in there. Not that convincing an argument perhaps but there you go.
  31. hotweldfire

    Advice for external heated filter....

    Nice tank. I thought about this myself a while ago. Whilst there is a very expensive eheim with a built in heater the overwhelming advice i got was to get separates because of the risk of one part of the filter going rendering the rest useless. This might be of use...
  32. hotweldfire

    Powerheads & curious fish: Darwinism in action??

    You could try this (apologies for the missing pics, don't know what imageshack rule I've violated): http://ukaps.org/forum/viewtopic.php?f=10&t=3012&start=10 Works very well. Have subsequently replaced the net on my filter inlet with the mesh suggested on that thread but it worked. Not a...
  33. hotweldfire

    Seeding new filter and flow

    Thanks, that was precisely the kind of thread I was looking for but my search skills failed me.
  34. hotweldfire

    Seeding new filter and flow

    Hi All, I am about to set up a new nano and am currently running the filter for it in my mature tank (first link in my sig). Stupid question - should I be running the new filter on a slow flow rate to maximise the amount of contact time the sponge has with mature tank water? Or should I be...
  35. hotweldfire

    Glass intakes killing shrimp

    Have one in my main tank and it does tend to clog up pretty fast. Have to give it a little rub with filter on every few days to break down larger stuff.
  36. hotweldfire

    Glass intakes killing shrimp

    Have been thinking about the same thing as I was planning on glass pipes on a tank I'm about to set up. Was thinking about sticking one of these http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=110499036789&ssPageName=STRK:MEWNX:IT#ht_3543wt_1139 on the bottom of the inlet. Kind of...
  37. hotweldfire

    Eheim pro 3 2080

    You probably would. I have the 2071 with a few cm clearance and I can get the taps off with a bit of fiddling. Can't get the trays out though. Only way to do that is to take the unit out of my cabinet by tipping it backwards or sideways. Unfortunately this causes it too leak even with the head...
Back
Top