Andrew Butler
Member
I'm stumped on a descriptor or source for the part below AND to complicate things I'd like it to be a 90 degree version if I can.
As minimal as possible, I imagine to suit something like a 3mm cable going through or have a 5.5 x 2.5mm DC Barrel socket on a flying lead as part of it, the piece it passes through is some thin Aluminium which I'd guess is 1.5mm although I'm not sure on that.
I don't want a big M16 screw type cable gland, just something small and simple that pushes into a hole and has a rubber ring either side to keep it there or similar.
Many thanks
Andrew
As minimal as possible, I imagine to suit something like a 3mm cable going through or have a 5.5 x 2.5mm DC Barrel socket on a flying lead as part of it, the piece it passes through is some thin Aluminium which I'd guess is 1.5mm although I'm not sure on that.
I don't want a big M16 screw type cable gland, just something small and simple that pushes into a hole and has a rubber ring either side to keep it there or similar.
Many thanks
Andrew
Last edited:
