Inline Diffuser help

Joined
13 Feb 2020
Messages
100
Location
Wexford,Ireland
Also. I am not sure how to read the regulator. Going by this picture is the cylinder nearly empty?
 

Attachments

  • 92062808_1496762967171400_2300454487409557504_n.jpg
    92062808_1496762967171400_2300454487409557504_n.jpg
    28.1 KB · Views: 23

Zeus.

Member
Joined
1 Oct 2016
Messages
3,380
Location
Yorkshire,UK
Looks like its getting low, if its a single stage reg it will be getting close to the end dump also!!! so keep a close eye on it ;)

your cylinder pressure is on the left and working pressure is on the right

Normal (pretty full) pressure is about 1000PSI or about 7Bar and working pressure varies, on my single stage reg its fixed as 20PSI and on my duel stage I have it set at 50PSI

Never had a end stage dump on my single stage reg (always avoided it) but once the working pressure starts to drop you are in the danger zone for sure, but it could be sooner.
 

Similar threads

Top