Need help with twinstar controller

[Deano3]

Hi everyone i am trying to set lights using my twi star controller the same one juris used but i can never seen to manage.

All i want to do is lights on at 14.00 at 90 percent then up to 100 percent for 2 hours then back to 90 percent and go off at 20.00


I tried setting as follows

No1 14.00-90%
No2 17.00-100%
No3 19.00-90%
No4 19.10-90%
No5 19.20-90%
No6 19.30-90%
No7 19.40-90%
No8 20.00-0%

I have tried and can never get it working. I thought maybe need to use all 8 numbers.
Any advise would be great.

Thanks dean

Sent from my SM-G970F using Tapatalk

 

[Zeus.]

You need two of the timings at 0.0%, one at start of lights OFF and the other at the end of lights OFF.
So change No 1 to 0.0% then play with other settings to suit.
IMO have a ramp up to max intensity for 30-45mins as plants need some time to get there systems up and running just like in nature.

 

[Siege]

Yes, keep it simple

14.00 - 0%
14.15 - 100%
21.45 - 100%
22.00 - 0%

you could change the 100% to 90% and then insert 2X 100% in the middle if you wish to.

 

[Deano3]

Right thanks everyone, do you need to use all 8 slots sp starts at 1 and finishes at 8 or not ? I only have a 6 hour photo period wonder if i should start increasing it




Thanks dean

Sent from my SM-G970F using Tapatalk

 

[Sammy Islam]

No you don't need to use all the slots/modes i only use 4, the rest are blank.

16.00 - 0%
16.15 - 50%
21.45 - 50%
22.00 - 0%