Pipe work to fluval 107

TheOslo

New Member
Joined
12 Jan 2020
Messages
2
Location
London
Hey as title states I’m wanting to change over to the lily pipes. From what I’ve been told if I did get the 12mm pipes, I’ll need. 12/16mm tubing? Thanks
 

Millns84

Member
Joined
2 Sep 2017
Messages
248
Location
Stockport UK
Not sure about the 107 but I used 16/22 hoses on my 306.

If the hoses are smaller for the 107 then I'm sure 12/16 would work. Just soak the new hoses in hot water for a couple of minutes and they'll go on a lot easier.
 

TOPEC

New Member
Joined
23 Nov 2019
Messages
1
Location
Canada
i have both the 106 and 406, and they both share the same aquastop valve, meaning only 16/22 hose will fit the valve. if you look at the corrugated hose that the 106/107 comes with, the grey part is the same size as all the other X06/X07 filter, but the corrugated hose itself narrows down quite a bit after the grey part. u will need a very short length of 16/22 hose and a 16/22 to 12/16 reducer and then 12/16 hose to the pipes.
 
Top