jonnyjr
Member
- Joined
- 22 Aug 2009
- Messages
- 113
Sorting through one of my sheds today i found some old marine equipment and immediately wondered if I could turn this into a co2 reactor, with built in heater. It already has a gromit whit a cable goes through for a pump, I would then Take this out and push my heater cable through, sealing it with silicone to prevent co2 escaping. Then drill 2 holes for the hose connectors also sealing these threads with silicone. Finally cutting the tube off on the inside. So you have a clear tube to see the co2 diffusion, an inlet calve for co2, a vent valve for de-gassing, a heater and water in/out? What do the rest of you think?
Jon
Jon