Reg Making Constant Clicking Noise

[Tim Harrison]

My dual stage reg is making a constant clicking noise and isn't working very well. It doesn't matter how high I turn it up, it only delivers a small amount of CO2.
I've cleaned the inline atomiser and changed the bubble counter so effectively ruling them out as the source of the problem.
Anyone got any ideas what may be wrong and how to solve the issue?

 

[Zeus.]

sounds like the diaphragm seal may be going to me, never had one go but that would be my initial thought.

I would take it apart and check the reg out, but I always take stuff apart to see if I can fix it.

 

[Tim Harrison]

Thanks Zeus, damned thing has stopped doing it now, and seems to be woking okay. I think I'll leave it for now but if it happens again I'll take your advice and take it apart...how hard can it be

 

[CryptKeeper]

I had intermittent clicking with my new regulator, it actually was the solenoid that kept turning on and off. The power cable connection inside the connector block made bad contact. I fixed that, now it clicks only twice per day

 

[Zeus.]

Do you have a spare reg Tim!

 

[Tim Harrison]

I've got an Up dual gauge, but that's in use on the nano atm https://www.ukaps.org/forum/threads/nano-nature-scape-riccia-invasion.49619/page-5#post-507839

 

[Andrew Butler]

it actually was the solenoid that kept turning on and off

I was going to suggest the solenoid too.