splitting co2

Nick16

Member
Joined
13 Aug 2008
Messages
1,769
Location
Surrey, UK
hi, if i have 2 tanks side by side, how do i split the co2 from my FE so i can have it going to a diffuser in both tank? what will i need?
 

Dave Spencer

Member
Joined
3 Jul 2007
Messages
1,389
Location
N. Wales
You will also require a needle valve in line with each branch, too.

Dave.
 

Nick16

Member
Thread starter
Joined
13 Aug 2008
Messages
1,769
Location
Surrey, UK
how do i determine how much co2 goes to each tank? as one tank is 120l and the other 40L so they will need different amounts of co2 surely? so one setting wont do all so to speak.
 

LondonDragon

Administrator
Staff member
Joined
21 Feb 2008
Messages
11,126
Location
London

Nick16

Member
Thread starter
Joined
13 Aug 2008
Messages
1,769
Location
Surrey, UK
aaronnorth said:
Nick16 said:
ahh thanks, i had a look on eBay but i couldnt find any, am i going daft? :lol:
http://cgi.ebay.co.uk/CO2-Needle-Valve- ... 634.c0.m14


i take it i mount it after the splitter, so i have co2 line A, split that into tow to form A and B. then, this goes on line B.?

can i still control line A from the reg and soleniod on the FE?

thats a massive help aaron, cheers. i must have been going mad, i tried like 6 diff searches!
 

Nick16

Member
Thread starter
Joined
13 Aug 2008
Messages
1,769
Location
Surrey, UK
i dont have ahuge budget really, i want to spend no more than about £20 on the needle valve and the splitter, and if i get the splitter from AE and needle valve from ebay that wroks out at about £20 by the time postage is factored in.
 

Similar threads

Top