Valve to Regulator airflow connection

Medoka

Member
Joined
10 Sep 2020
Messages
31
Location
London
Hello,
My question is as follows: I have an aqua medic regulator and aqua medic solenoid valve as shown below. However, I don't have any line which connects these two together.
DO you know what do I need need to connect these two?
Thank you.
First picture is what I need
Screenshot_20200926-135229_eBay.jpg
20200925_184431.jpg
20200925_184441.jpg
 

Attachments

  • 20200925_184421.jpg
    20200925_184421.jpg
    932.8 KB · Views: 5

hogan53

Global Moderator
Staff member
Joined
14 Dec 2008
Messages
4,600
Location
Hemel Hempstead HP3 8pq
Hi
You need a piece of Co2 tubing from the regulator to the solenoid!
Regulator> Co2 Tubing > Solenoid > Co2 tubing > Check Valve > Co2 tubing > Bubble counter > Co2 tubing > Check Valve > Diffuser.
 

Medoka

Member
Joined
10 Sep 2020
Messages
31
Location
London
Hi
You need a piece of Co2 tubing from the regulator to the solenoid!
Regulator> Co2 Tubing > Solenoid > Co2 tubing > Check Valve > Co2 tubing > Bubble counter > Co2 tubing > Check Valve > Diffuser.
Hello Hogan,
Many thanks for quick reply. By tubing, i assume you mean just a silicon 4mm air tubes as shown below,is that correct? If so is it safe? I assumed the line between valve and regulator should be solid as i send in the picture 3.


. Screenshot_20200926-152252_Chrome.jpg
Screenshot_20200926-135229_eBay.jpg
 
Top