• You are viewing the forum as a Guest, please login (you can use your Facebook, Twitter, Google or Microsoft account to login) or register using this link: Log in or Sign Up
  • You can now follow UKAPS on Instagram.

VIMI Micro Clone

Happi

Member
Joined
15 Jan 2012
Messages
448
Location
UTAH, USA
VIMI Micro Clone

Step #1:
1. start with 400 ml Distilled water and prepare Solution #2, #3 and #4 separately
2. add Ascorbic Acid or Vinegar and mix until fully dissolved
3. add Potassium Sorbate and mix until fully dissolved
4. wait few minutes
5. add chemicals, and mix until fully dissolved
6. fill the container to 500 ml with distilled water
7. wait few hours to make sure these solutions are fully dissolved, some of the chemicals take some time to fully dissolve.

Step #2:
1. start with 400 ml Distilled water and prepare Solution #1 separately
2. add Ascorbic Acid or Vinegar and mix until fully dissolved
3. add Potassium Sorbate and mix until fully dissolved
4. wait few minutes
5. add chemicals, and mix until fully dissolved
6. take 50 ml from Solution#2 and add into this
7. take 10 ml from Solution#3 and add into this
8. take 2 ml from Solution#4 and add into this
6. fill the container to 500 ml with distilled water
7. now you have a Clone version of VIMI Trace in Solution#1

Solution #1
Add 0.5 gram Ascorbic Acid or 5ml White Vinegar
Add 0.2 gram Potassium Sorbate
Add 3.44 gram Fe DTPA 11%
Add 2.54 gram Fe EDTA 13%
Add 1.9 gram Fe Gluconate (12.46%)
Add 1.82 gram EDTA Mn (13%)
Add 8.0 gram 0.1667 MgSO4.7H2O (9.8611 %)
Add 14.06 gram K2SO4 (44.8737%)

Solution #2
Add 0.5 gram Ascorbic Acid or 5ml White Vinegar
Add 0.2 gram Potassium Sorbate
Add 1.577 gram of EDTA Zn (15%)
Add 1.577 gram of EDTA Cu (15%)
Add 4.520 gram of H3BO3 (17.48 %)

Solution #3
Add 0.5 gram Ascorbic Acid or 5ml White Vinegar
Add 0.2 gram Potassium Sorbate
Add 1.01 gram Na2MoO4*2H2O (39.6582 %)
Add 0.564 gram CoSO4*7H2O (20.9650%)

Solution #4
Add 0.5 gram Ascorbic Acid or 5ml White Vinegar
Add 0.2 gram Potassium Sorbate
Add 0.958 gram NiCl2*6H2O (24.6931%)

Solution #1, add 20 ml per 50 gallon, each 20 ml will add the following:

K 1.3333
Fe 0.2
Mg 0.166
Mn 0.05
B 0.0167
Zn 0.005
Cu 0.005
Mo 0.0017
Co 0.0005
Ni 0.0002

This is a clone version of VIMI Micro, we can only clone it based on the given ppm. VIMI uses three different sources of Iron, the exact ratio in ppm is unknown, but I have added all three forms of Iron based on what I think could be good ratio. ENJOY
 
Top