Best place for outlets in 5x2x2 with unused built in weir

[Lindy]

I have a 5x2x2ft tank with a weir I can't take out but not running sump. Will be running an eheim 1200xlt and a jbl e1501. So that is 3 inlets and 2 outlets between the 2 filters. I'm not sure where to place the outlets. I had thought one outlet at each end of the tank, one at nearest end of side and one at furthest end of side to get circular flow but the weir throws a considerable sized spanner in the works for the outlet placed facing across the back of the tank. Should I put both at the same side of the tank so all outlets face in the same direction? Just to clarify the outlets will be hung on the sides and not the back of the tank. I have opted for stainless steel inlets(one of the 3 will be glass) and outlets.
I could put the outlets at the back if anyone thought this would be better.

Sent from my SM-G920F using Tapatalk

 

[rebel]

Is the weir in the middle of the tank like a box jutting in?

Sounds like a nice tank though.

 

[Lindy]

Yes. I

Sent from my SM-G920F using Tapatalk

 

[tim]

I think outlets on the back wall, either side of the weir would create the most even flow, one in each corner would fall short in a five footer IMO lindy.

 

[Lindy]

Thanks Tim

Sent from my SM-G920F using Tapatalk