Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
You are viewing the forum as a Guest, please login (you can use your Facebook, Twitter, Google or Microsoft account to login) or register using this link: Log in or Sign Up
There's one here Chris.
http://ukaps.org/forum/threads/problem-with-resonance-tone-in-diy-spray-bar.30453/#post-320579
I abandoned my acrylic bar as I couldn't stop the noise:(
Well I tried increasing the hole size up to the point where the pressure was unequal across the spraybar and it failed to have any real impact:(
This is so annoying:mad:
Actually that's not true, it just raises the pitch so its less audible. Turning the flow up and down just changes the pitch so I think I might have to increase the hole size.
It is a poor show. CO2 injection is possibly now more popular than ever and them not supplying a FE adapter might have a knock on effect on sales of the reg. I got one of the original adapters but have two regs. I'm going to experiment will plugging the hole.
Lee - if the pin hole can be sealed the JBL one will work. Its just that the thread isn't long enough on it to cover the hole. I'm not sure what purpose the hole serves but I'm sure there must be a way of sealing it:banghead:
Yeah I ordered it online and they came back about a week later and refunded my money saying they were out of stock and are not made anymore. That's when I looked at a JBL one but I found a post on another forum saying it will not work unless you can plug the pin hole in the D-D / Deltec one. As...
That is the one Hoggie but I cant believe they are still advertising it. It was that site that told me they are not made anymore when I tried to order one six months ago.
Might be worth another try though.
It has become a real pain now that these are no longer manufactured. Some places will tell you that a JBLU-M converter will do the trick but unless you can seal the pin hole in the D-D neck where the reg screws into it won't work.
Hi Frederick. The original JBL solution had to be added to 4dkh. The newer solution that you have just needs to be put into the drop checker with no 4dkh solution.
I have an Aquaone AR850 and want to fit an external filter without butchering the the trickle filter housing. I need to do something like what is shown towards the bottom of this thread.
http://tinyurl.com/668x2xj
Anyway my question is and it might be a stupid one, is it OK to use the speedfit...
Yes it is Bob. A non thermo canister replacement is quite a reasonable price but I can only find spares listed complete with heater module for the 2324. Spares or repair is also a good suggestion. I'm going to try the ct1 fix that Jez suggested first. The break is right in the corner, and is...
Thanks for the advice. It's actually worse than I first thought, the corner is almost hanging off. I didn't know if epoxy or super glue would hold it and then seal from the inside with an aquatic sealer. Again I'm not sure if the sealant would stick to this kind of plastic?
I did look at a new...
I recently got the above filter 2nd hand from Ebay. Today I got time to install it. On adding water to the canister to cleann it the water leaked onto the floor. Closer inpection shows a crack in one corner down by one of the feet. This is obviously an expensive part to replace and would...
Hi,
The paint on the relector in my Aquamode 600 has started to flake and turn brown. I'm looking to repaint it but do I need a special reflective paint or just an off the shelf white?
Any help appreciated.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.