Search results for query: *

thanks for the feedback, will reconsider.

Hi, I have a Eden 521 filter that uses 16/22 hose. If i was to reduce it to 12/16mm will i encounter any issues?

if you can remove the cups, put them in boiling water for a while.

Not enough filteration??? P&H 25l Supplied Filter I slapped an eheim 2213 on my one

that filter looks pretty sweet!

american gallon?

Im currently using a hydor eth 200w external heater on a eheim 2213 classic filter and from what i can see, there isnt really any noticeable reduce in flow. Regarding ro water, most lfs sell them at £1 a gallon (4.34 litres).

I am Currently using an eheim 2213 classic with a hydor eth 200w on my 60 litre tank and have had no problems so far.

A spraybar with out a doubt.

The FX-5 is a beast, who wouldn't want one of those, lol.

The bushes are important as they absorb the movement made by the propeller.

i get a thin metal wire, feed it though the hose from one end to the other, attach a wet rag and tie it and pull it through the hose. By doing this you are cleaning every single piece of dirt in the hose. I did try attaching a garden hose from one side to the other but never though it was clean...

Having more media in the filter tends to reduce your flow rate. By removing a sponge or two you increase the flow rate of the filter because there's nothing holding it back (or blocking the water's route).

i sometime get a humming noise when i clean out my eheim 2213. To stop this i removed the end cap from the spray bar for a bit (to get all the air out) and out it back on. After that it's dead quiet. Maybe you can try that.

Start with an inch first, the smaller the hole the better the more powerful the spray.

At the moment i'm using a eheim 2213, can't complain. I don't recommend HOB filters, it tends to be more noisy than external filters plus you can't contain alot of media in it.