• You are viewing the forum as a Guest, please login (you can use your Facebook, Twitter, Google or Microsoft account to login) or register using this link: Log in or Sign Up

ADA Vuppa

I use Eheim surface skimmer. It is briliant, much smaller in size and cost a fraction of 180£ for the Vuppa.
Vuppa seem to me a chunky metal piece that would not fit very well with a nice aquascape. And taking it in and out of the tank would be a pain in the neck.
 
Adding acticvated carbon to a surface skimnmer that's a self powered internal filter basically, I think they should have though more about this device before marketing it.

Needs to be external and out of the aquarium.
 
I wouldnt spend that much money anyway on one. It probably only costs £50 to make and then retails out at £180 just because it says ADA on it!
 
I was under the impression that the glass lily pipes ADA manufactures were supposed to be sufficient to get rid of surface film.
They look really stunning indeed, but where the costs line ends?
Since I am using the uglier Eheim skimmer I forgot what is surface film.
Besides i have been thinking for a new aquarium design that would not even need any external filter or skimmer, nor lily pipes and tubing for that matter. And it will cost me for a 300Litres version less than 180£. Just need time to get to make one.
 
Gary Nelson said:
That seems allot of money! I think I'd sooner spend a quarter of that and double my fertiliser amounts...
Click to expand...

I'm not being sarcy, but does that clear off the film from the water surface then ? 😳
 
Antipofish said:
Gary Nelson said:
That seems allot of money! I think I'd sooner spend a quarter of that and double my fertiliser amounts...
Click to expand...

I'm not being sarcy, but does that clear off the film from the water surface then ? 😳
Click to expand...


It would.

I got no film on my tank, no skimmer and no lily pipes.

I use the eheim set 2 grey pipes. 🙂

Would like to get lily pipes, but with them being made of glass and me being so clumsy, I think that in the end I would break them, thus a waste of money.

Also, this large metal thing on a tank really does not look good.

Maybe make it a much smaller tool, or put it outside the tank?

But yes, rather spend the money on ferts and a good regime than this. But being ADA it will sell for sure, and have many fans and supporters. 🙂




___________________________
 
plantbrain said:
Adding acticvated carbon to a surface skimnmer that's a self powered internal filter basically, I think they should have though more about this device before marketing it.

Needs to be external and out of the aquarium.
Click to expand...
Agreed.

I'm usually a big fan of ADA styling but this seems a step in the wrong direction. What happened to their concept minimising the impact of equipment on the aquascape!?

Very surprising.
 
I had high hopes, but the best thing for this solution is the Mame, it's all glass and the prefilter skimmer is quite effective and fun the watch and try and figure out how it works.

Not cheap either, but, does the job really well, much better and muc less intrustive that the Vuppa or the Ehiem etc.
I have a Mame on my 60p.

If the Vuppa did the trick etc, and looked good and got stuff out of the tank, then perhaps. I suppose you could use a vuppa the day before folks come over to see your tank, like a before the guest come over type of thing.......but you could also just do a water change :idea:
 
Seeing the film on the tank surface is a good indication that something is wrong with the tank. I accept sometimes does not look good, but we understand the plants giving feedbacks we will not hate that so much 😀

Vuppa is expensive one. The thing i like is it's easy to remove.
Probably they created it because not everyone used the lifted Lily at the end of the day.

But as you mentioned before a quick water change, aeration at the end of the day solve this issue.

Cycling tanks has this anyway. Other than that the plants strugling if you face with this so it's better to solve the root cause.
 
plantbrain said:
I had high hopes, but the best thing for this solution is the Mame, it's all glass and the prefilter skimmer is quite effective and fun the watch and try and figure out how it works.

Not cheap either, but, does the job really well, much better and muc less intrustive that the Vuppa or the Ehiem etc.
I have a Mame on my 60p.

If the Vuppa did the trick etc, and looked good and got stuff out of the tank, then perhaps. I suppose you could use a vuppa the day before folks come over to see your tank, like a before the guest come over type of thing.......but you could also just do a water change :idea:
Click to expand...

Hey Tom do you have any more info on this ? Or a link so I can look at it ? Cheers.
 
Antipofish said:
plantbrain said:
I had high hopes, but the best thing for this solution is the Mame, it's all glass and the prefilter skimmer is quite effective and fun the watch and try and figure out how it works.

Not cheap either, but, does the job really well, much better and muc less intrustive that the Vuppa or the Ehiem etc.
I have a Mame on my 60p.

If the Vuppa did the trick etc, and looked good and got stuff out of the tank, then perhaps. I suppose you could use a vuppa the day before folks come over to see your tank, like a before the guest come over type of thing.......but you could also just do a water change :idea:
Click to expand...

Hey Tom do you have any more info on this ? Or a link so I can look at it ? Cheers.
Click to expand...

this one???
http://reefbuilders.com/2010/06/07/hand ... aquariums/
 
Since i am playing with this thingie in the past 2 weeks i thought i share some experiences. Hope this will be useful to you.

We know it is expensive, just like any other ADA products. So will not say more about the prices. They know what they are doing and you only can see this when you test it.

I got the 20th Anniversary limited edition. This adds a bit tweak on the top of the original product. It has a titan coating 😀

8080334397_281bd24aaf_c.jpg

8080329558_94d336787e_c.jpg

I was skeptical just like George above. How on earth a steel thing comes to their clean transparent style? Why they changed their mind? It's big etc...

Actually they did not changed their mind. This stuff is a small filter and because of that it's align with their Super Jet style. I am sure this was the goal when they had a concept in their mind.

It's small but you can't see this from many photos.

Here on our 60L tank

8087903281_613bb4f1f6_c.jpg

And on a 240L tank

8096829341_f65ed35acc_c.jpg

The product itself has a small motor in it. Which works like a powerhead. Pretty good.
The body has some filtration material in it. In default it comes with Bio Cube from ADA, but you can place in any other filter material like Bio Rio, Purigen etc.

This stuff works pretty efficiently. After 10 minutes you put up to the tank and all the oil film, bacterial film, foam etc will be eliminated. And like other skimmers will collect the small leafs from the surface.

I've tested this on multiple tanks with different surface scum in it and the effect was the same. Fast!
Sometimes you can have the similar effect when you use the lily pipe aeration overnight, but that takes a night to do that and not solve all kinds of surface issues like Vuppa.

So 10 minutes. I had a long weekend the past week when we had a 4 days out. Because we're shooting our display tanks with a lot of light some tanks got oil films after 4 days with no fertilizers, maintenance delays etc.

Because of this speedie thing we cleaned up all the tanks very quickly. You do not need to keep it on the tank after it's done. It's not hooked to your filter so you can remove it anytime.

I've seen ADA used it on their small tanks as a standalone filter. (til the new Super Jet came out)
I easily can imagine this works great on small tanks as an internal filter. Much more efficient than most of the internal filter you can find in aquarium nano kits including Eheim Aquastyle too where the filter is good.

The only thing you need to take care of is the basket in it. You need to lift it up or push it down do the water level. It's not like many movable skimmer where the floating unit move with the water. This is fixed here. Do not know what happens if the water ran out from the machine. Maybe the motor burn. Not seen there's an autostop, but maybe i am wrong need to check it.

So the stuff is small, it look better in person, do the job very efficiently the only thing what is negative here is the pricing. But otherwise it's something what you would use very easily with any surface problem.

This not solve your scum issues, but do a quick fix for you. You have to find the problem with your tank.
 
Looks nice Viktor but I still wouldn't trade it for my clear acrylic skimmer 🙂
Eheim came with a new skimmer also: EHEIM skim350 more or less the same size, hopefully it won't have the same price tag 🙂
 
clonitza said:
Looks nice Viktor but I still wouldn't trade it for my clear acrylic skimmer 🙂
Eheim came with a new skimmer also: EHEIM skim350 more or less the same size, hopefully it won't have the same price tag 🙂
Click to expand...

And hopefully the plastic thingie will not leak everywhere 😉 seen that at interzoo this year


Mi másról, mint iPhone-ról Tapatalk progival 😉
 
You must log in or register to reply here.
Back
Top