• You are viewing the forum as a Guest, please login (you can use your Facebook, Twitter, Google or Microsoft account to login) or register using this link: Log in or Sign Up

IKEA Besta Cabinet

GillesF

GillesF

Member
Joined
21 Jun 2011
Messages
279
Location
Belgium
Hi guys

I've been looking for cheap alternatives to the ADA cabinets and came across this fella: BESTÅ Open kast met deur - wit - IKEA

The dimensions (60x40) are perfect although the cabinet could be somewhat higher, but that should easy to fix. What alarms me is the maximum weight it can hold according to the IKEA website: 10kg.

How is this measured? And why is the carrying capacity so low while it's made of the same material as other aquarium cabinets? Is there a way to reinforce it?

Cheers,
Gilles
 
Hi there,

I made my self a cupboard from various ikea parts ( Black/Brown see my journal in sig ) witch cost me around £30-40 too make but you could build a timber frame inside that one to make it more load bearing or have someone make you a box steal frame in place of wood.

Cheers
 
Well, one upgrade I can imagine is replacing the cardboard back by a wooden one. That should make it a lot more sturdy, no?
How did you reinforce yours?

Cheers,
Gilles
 
I suppose if you have a 10-20 liter aquarium, it's okay.

It's made like crap, cost not much, but you have to make it.
It's cheap and okay, but little comes from IKEA that is strong and worthy of tank stands.
 
Hi Tom

It's more like 100kg 🙁

I was thinking of building an MDF cabinet inside this one. I've looked around for commercial cabinets here in Belgium but either they are way too expensive or they look like crap. I'm not the DIY kind of guy (tried once, failed miserably) so that's a no go.
 
GillesF said:
Hi Tom

It's more like 100kg 🙁

I was thinking of building an MDF cabinet inside this one. I've looked around for commercial cabinets here in Belgium but either they are way too expensive or they look like crap. I'm not the DIY kind of guy (tried once, failed miserably) so that's a no go.
Click to expand...

Research, and Try again! You will suceed!
 
The signature cabinets as far as I am aware are made from MDF where as the Ikea stuff is just chipboard which is no where near strong enough alone. I made mine from 18mm MDF and it supports 140kg ish with eash and has even survived being slid across the room with the full tank on.
 
Try a timber yard, they may be able to cut board to the sizes required then all you have to do is fix it together 🙂 if your not upto that then look in local paper for odd job man or man with a van loads of adverts here locally by ikea, you buy it the collect & erect
 
You must log in or register to reply here.
Back
Top