AshRolls
Member
Reading through the excellent sticky on flow at the top of this forum I would like to run over my proposed setup to see if it is the optimal solution...
I have an Eheim 2080 filter which has two inlets and just one spraybar outlet. I have a pretty standard 5ft Juwel Rio 400L tank. I intend to place the spray bar in the middle of the back tank wall, horizontally at the surface pointing out at water level toward the front glass. I intend to place each inlet tube in opposite rear corners, near the substrate.
*edit* Here is a diagram of proposed setup...
Would you recommend this setup, or can you recommend a better configuration? Thanks.
I have an Eheim 2080 filter which has two inlets and just one spraybar outlet. I have a pretty standard 5ft Juwel Rio 400L tank. I intend to place the spray bar in the middle of the back tank wall, horizontally at the surface pointing out at water level toward the front glass. I intend to place each inlet tube in opposite rear corners, near the substrate.
*edit* Here is a diagram of proposed setup...
Would you recommend this setup, or can you recommend a better configuration? Thanks.