Danny
Member
- Joined
- 29 Jul 2012
- Messages
- 863
Ok so here is my build so far, I will be laminating the mdf with proper laminate as used on any contiboard you can buy in the shop and also filling and rubbing down the cabinet, I have to also seal the mdf with PVA which I will do tonight.
My cut list: 18mm mdf
610x510 x2 Top and Bottom
492x600 x2 Sides
574x600 x1 Back
100x600 Front brace for the door closure
610x600 divided into three:
100x610 Plinth above the doors
500x305 x2 The doors
Total cost about £40
8x4 sheet of mdf, pieces cut in B&Q
Magnetic holders x4
4x65mm dry wall screws
The pics so far, not great but hopefully will give you an idea of the build.
The wood,
Coming together
All together
Doors off
Dry finish
water test as it is now.
Any questions feel free to ask.
My cut list: 18mm mdf
610x510 x2 Top and Bottom
492x600 x2 Sides
574x600 x1 Back
100x600 Front brace for the door closure
610x600 divided into three:
100x610 Plinth above the doors
500x305 x2 The doors
Total cost about £40
8x4 sheet of mdf, pieces cut in B&Q
Magnetic holders x4
4x65mm dry wall screws
The pics so far, not great but hopefully will give you an idea of the build.
The wood,
Coming together
All together
Doors off
Dry finish
water test as it is now.
Any questions feel free to ask.