french tony
Seedling
- Joined
- 29 Jul 2009
- Messages
- 22
I got the system setup a few days ago:
2 Kg FE
Azoo pressure regulator/ senoloid / needle valve
It has been working fine. Today Co2 came on as normal and all was going well. The high pressure gauge read 750 psi and the low pressure reg 40 psi.
I was out for about an hour, came back, no CO2 bubbles in the tank. Low pressure valve was down to 0.
I fiddled a little with the on/off tap on the FE and suddenly a lo of co2 came out. now the high pressure gauge reads 0 and the low pressure is off the chart, even with no pressure at all from FE.
is 800 psi normal for a 2 Kg FE?
Does that sound like a faulty Regulator?
That's what it looks like. FE is shut off on this picture.
2 Kg FE
Azoo pressure regulator/ senoloid / needle valve
It has been working fine. Today Co2 came on as normal and all was going well. The high pressure gauge read 750 psi and the low pressure reg 40 psi.
I was out for about an hour, came back, no CO2 bubbles in the tank. Low pressure valve was down to 0.
I fiddled a little with the on/off tap on the FE and suddenly a lo of co2 came out. now the high pressure gauge reads 0 and the low pressure is off the chart, even with no pressure at all from FE.
is 800 psi normal for a 2 Kg FE?
Does that sound like a faulty Regulator?
That's what it looks like. FE is shut off on this picture.