Faulty solenoid or leak?

[W1368]

A stange thing I've noticed this morning before the lights come on:

When the solenoid is shut off the bubble counter is still going at around 1 bubble every 5-10 seconds (I have this set at just over 1bps when switched on).

I've checked for leaks with no sucess and all connections are as tight as possible.

JBL regulator with JBL solenoid attached. Glass bubble counter and glass diffuser.

Any help most appriciated



Also a little worried that I'm using up too much C02. Average two 600g disposable bottles each month for a 125L tank.

 

[Matt Warner]

Hi, I had this trouble with my solenoid once. You probably have a bit of dirt under the plunger of the solenoid. Take the solenoid off, take the plunger and spring out and give it all a good blow out. That should do the job.