I have just completed a pH profile for today.
Time is along the x- axis, pH is along the y- axis.
12:30 = Co2 ON
14:00 = Lights ON
21:00 = Co2 OFF
22:30 = Lights OFF
KH is approximately 2.7
According to a few charts, I am achieving approximately 30 PPM Co2 concentration around 19:00.
Does this profile look ok, and is there anything I can do to improve my Co2/ lights schedule?
Is the Co2 coming on early enough? At lights on (14:00), pH was 6.7. This equates to a Co2 concentration of approximately 16-17 PPM. Is that acceptable, or should it ideally be higher?
I appreciate any input.
Time is along the x- axis, pH is along the y- axis.
12:30 = Co2 ON
14:00 = Lights ON
21:00 = Co2 OFF
22:30 = Lights OFF
KH is approximately 2.7
According to a few charts, I am achieving approximately 30 PPM Co2 concentration around 19:00.
Does this profile look ok, and is there anything I can do to improve my Co2/ lights schedule?
Is the Co2 coming on early enough? At lights on (14:00), pH was 6.7. This equates to a Co2 concentration of approximately 16-17 PPM. Is that acceptable, or should it ideally be higher?
I appreciate any input.