bennell
Member
Hi all!
Would just like a opinion on a possible deficiency that has started to creep in the past week or so, that has never been present before.
The new leafs of my anubias barteri have started to wrinkle round the edges and the same with my ench.
I also have pin holes in various plants and a transparency in one or two which is developing really quickly and eating up the leafs.
One of the old leafs on my L. Repens seems to have melted? And im now getting gsa on slow growers (crypts and anubias)
Tank specs;
140L
Light - zetlight 42w led 6700k + R&B on for 7 hours @100% and 1 hour (sunrise+sunset)
Co2 injected via jbl inline diffuser for 8 hours with drop checker moving into yellow when co2 shuts off.
pretty confident co2 isnt the issue on this as im dosing a pretty high amounts and flow is more than adequate (but im not ruling it out!)
My EI dosing should yeild the following (weekly amounts macro3x mirco 3x)
No3 22.5ppm
N 5.07 pom
K 15.54 ppm
P 1.26 ppm
Po4 3.9 ppm
Mg 15 pmm
S 19.8 ppm
All worked out from http://rotalabutterfly.com/nutrient-calculator.php using the salts kno3,kh2po4 and mgso4
Im suspecting iron and k but currently dont have the test kits to check (will have at weekend)
Any initial thoughts as to what it could be?
Thanks
Pics to follow
Would just like a opinion on a possible deficiency that has started to creep in the past week or so, that has never been present before.
The new leafs of my anubias barteri have started to wrinkle round the edges and the same with my ench.
I also have pin holes in various plants and a transparency in one or two which is developing really quickly and eating up the leafs.
One of the old leafs on my L. Repens seems to have melted? And im now getting gsa on slow growers (crypts and anubias)
Tank specs;
140L
Light - zetlight 42w led 6700k + R&B on for 7 hours @100% and 1 hour (sunrise+sunset)
Co2 injected via jbl inline diffuser for 8 hours with drop checker moving into yellow when co2 shuts off.
pretty confident co2 isnt the issue on this as im dosing a pretty high amounts and flow is more than adequate (but im not ruling it out!)
My EI dosing should yeild the following (weekly amounts macro3x mirco 3x)
No3 22.5ppm
N 5.07 pom
K 15.54 ppm
P 1.26 ppm
Po4 3.9 ppm
Mg 15 pmm
S 19.8 ppm
All worked out from http://rotalabutterfly.com/nutrient-calculator.php using the salts kno3,kh2po4 and mgso4
Im suspecting iron and k but currently dont have the test kits to check (will have at weekend)
Any initial thoughts as to what it could be?
Thanks
Pics to follow
Last edited: